2022年5月18日星期三

newest generation of pellet machine working for wood sawdust and wood waste

Structure and working principle of newest generation of pellet machine working for wood sawdust and wood waste

1 product structure:

The vertical ring die sawdust pellet mill is composed of motor, reducer, bearing chamber, feeding part, discharging part, pressing part, etc.

2 Working principle:

The newest generation of pellet machine working for wood sawdust and wood waste operates in the direct connection mode of motor. The motor is connected through elastic coupling. After 90 ° direction change, the horizontal motor drives the hollow transfer spindle of vertical casting, and the spindle drives the pressing roller to roll the inner surface of the die to complete the pressing process.

During operation, biomass sawdust raw materials fall vertically from the feed inlet. After the rotation of the roller, the materials are continuously and evenly distributed on the surface of the inner cavity of the die (the contact elevation between the roller and the die). Under the rolling of the roller, the powdery materials pass through the holes of the die (evenly distributed on the holes on the inner surface of the die). In this process, the material is subjected to the action of high pressure and high temperature, resulting in physical changes, which promotes the powdered material to form a continuously elongated cylindrical solid body, and then the pellets are cut off by the cutter and discharged from the discharge port. So far, the pellet pressing process is completed.

 

Advantages of biomass pellet mill:

With the coordinated management of energy and environment in China, biomass pellet stoves have been installed and used in villas or houses in medium and large cities. In the near future, this convenient, energy-saving and green energy will become a hot commodity and will appear in supermarkets or chain stores. The rational utilization of biomass fuel is to use the solid wastes of crops such as corn stalk, wheat straw, rice straw, peanut shell, corn cob, cotton stalk, soybean stalk, grain husk, weeds, branches, leaves, sawdust and bark as raw materials, which are crushed, pressurized, densified and formed into small rod solid pellet fuel.

Pellet mill fuel is made by extruding sawdust, straw and other raw materials with pressure roller and ring die at room temperature. The density of raw materials is generally about 110-130kg / m3, and the pellet density after dieing is greater than 1100kg / m3. It is very convenient for transportation and storage. At the same time, its combustion performance is greatly improved.


Production Parameters:

Model

OutputT/H

Powerkw

Specification of processed pellets

Weight t

Sizemm

GXL560A

1-1.5

90

Φ4-12mm

5.0

2200*1300*1600

GXL560B

1.3-1.8

110

Φ4-15mm

5.2

2200*1300*1600

GXL560C

1.5-2.0

132

Φ4-20mm

5.5

2200*1300*1600

GXL720

2.0-3.0

160

Φ4-20mm

7.5

2400*1400*1800

GXL850

3.0-4.0

220

Φ4-30mm

14

3000*1500*2300


Jinan GuanBei Machine Manufacture Co.,Ltd

Jinan Share Precision Machinery Co.,Ltd

Mob/Whatsapp/Wechat: +86-15053177578

Email: info@chinapelletline.com 

OR: Chinapelletline@gmail.com 

Website: www.chinapelletline.com

没有评论:

发表评论