The cutting raw materials of wood chipper machine price with electrical control cabinet are mainly small-diameter wood, wood cutting residues (branches, branches, etc.) and wood processing residues (veneer, lath, log core, waste veneer, etc.). It can also be used to cut non wood raw materials (such as hemp rod, reed, moso bamboo, etc.).
The wood chipper machine price with electrical control cabinet is composed of machine base, knife roller, upper and lower feeding mechanism, feeding device, hydraulic buffer system and electrical control system.
1. Wood chipper machine price with electrical control cabinet base
The base of wood slicer is welded with high-strength steel plate, which is the supporting foundation of the whole machine. The base support of wood slicer is welded with the base, which is used to place the base. The bottom knife of wood slicer is fixed on the bottom knife base through the knife pressing block with specially manufactured high-strength bolts. The bottom knife base of the wood slicer can be pulled out freely through the hole on the side of the base wallboard, and it is fixed on the base by two clamping keys. The wood chips cut by the wood slicer fall through the holes of the screen and are discharged from the bottom of the base. Oversized wood chips can be broken again by the crushing rod installed on the base.
2. Knife roller of wood chipper machine price with electrical control cabinet
The knife roller of wood slicer is the working part of wood slicer, which is welded by steel plate (the roller of small wood slicer is an integral solid structure). It has good rigidity and moment of inertia, and has passed the dynamic balance test. The main shaft of the wood slicer is connected with the knife roller through a locking device or a flat key. The utility model has the advantages of simple structure, convenient assembly and disassembly and reliable use. Both ends of the main shaft are supported by automatic centering roller bearings, and the bearing seat is fixed on the base.
The knife roller of the wood slicer is equipped with two flying knives, which are fixed on the knife roller through a pressure block with specially manufactured flying knife bolts.
3. Upper and lower feeding mechanism of wood chipper machine price with electrical control cabinet
The upper feeding mechanism of wood slicer is composed of upper feeding roller seat, feeding roller, feeding roller shaft, pendulum shaft, reducer, etc. The lower feeding mechanism of wood slicer is composed of feeding roller, supporting roller, feeding roller shaft and reducer. The feeding roller of wood slicer has large diameter, heavy weight and coarse teeth on the surface, so it can compress the raw materials and make them enter the cutting position at a balanced speed to ensure the length and quality of chips. The teeth of the upper and lower feeding rollers are staggered with each other to clean up the debris. The upper feeding roller of the wood slicer is fastened with the shaft through the locking device. The shaft is supported by the spherical roller bearing, and the bearing seat is fixed on the upper feeding roller seat. The feeding roller seat on the wood slicer is installed on the base through the pendulum shaft and can swing up and down around the pendulum shaft, so as to ensure that it can automatically adapt to the feeding height. The lower feeding roller of the wood slicer is fastened with the shaft with a locking device. The shaft and the supporting roller are respectively supported by spherical roller bearings, and the bearing seat is fixed on the base. The upper and lower reduction motors of the wood slicer drive the upper and lower feeding rollers respectively. The rotation direction of the upper feeding roller is the same as that of the knife roller, and the rotation direction of the lower feeding roller is opposite to that of the knife roller
4. Feeding device of wood slicer
The feeding device of wood slicer has two forms: belt conveyor or vibrating feeder. The belt conveyor is composed of head pulley, tail pulley, belt and frame. The head wheel of the wood slicer is driven by the lower feeding roller shaft through a chain. The head pulley drives the belt to feed the raw materials into the feeding mouth.
The vibrating feeder is composed of material trough, base and driving part. The crank connecting rod mechanism is driven by the motor alone. Due to eccentric rotation, the material slot is dragged for simple harmonic vibration, so that the raw material moves forward in the slot and enters the feeding port.
5. Hydraulic buffer system of wood slicer
In addition to small chip machines, large and medium-sized wood slicers have hydraulic buffer systems
Jinan Share Precision Machinery Co.,Ltd